Uncategorized

Top 8 Icemaker Outlet Box – Ice Makers

As an Amazon Associate I earn from qualifying purchases.

1. Eastman

#ad

Eastman 60233 PEX Pre-assembled Ice Maker Outlet Box, 1/2 Inch Crimp PEX Connection with Installed 1/4-Turn Ball Valve, White

#ad
Eastman #ad - Working temperature is 34° F to 180° F. The faceplate dimensions are 8-1/4 inch x 7-5/16 inch. Equipped with a 1/2 inch crimp PEX inlet and 1/4 inch OD compression outlet connections. Working pressure is 125 PSI. Designed for a rough opening of 5-3/4 inch x 3-1/2 inch x 4-7/8 inch.
BrandEastman #ad
ManufacturerEZ-FLO #ad
Height7.5 Inches
Length8.25 Inches
Width3.25 Inches
Part Number60233
Model60233

2. Eastman

#ad

7.35 x 3.25 x 8.25, Eastman 60234 CPVC Ice Maker Box

#ad
Eastman #ad - Features a rough opening of 5-3/4 inch x 3-1/2 inch x 4-7/8 inch. Faceplate measures 8-1/4 inch x 7-5/16 inch. Maximum working temperature of 34° F to 180° F. Features a rough opening of 5-3/4 inch x 3-1/2 inch x 4-7/8 inch. Equipped with 1/2 inch cpvc inlet and 1/4 inch OD Compression outlet connections.
BrandEastman #ad
ManufacturerEastman #ad
Height11.2 Inches
Length11.2 Inches
Width15.2 Inches
Part Number60234/39165
Model60234

3. SharkBite

#ad

1/2 Inch x 1/4 Inch Compression, PE-RT Pipe, Sharkbite 25033A Ice Maker Outlet Box with Water Hammer Arrestors, CPVC, PEX, Push-to-Connect Copper

#ad
SharkBite #ad - Just push to create a watertight seal to the SharkBite fitting. Performance: rated to 200 psi and 200 Degrees F. Installs in seconds: ice maker outlet box with Hammer Arrestor requires no special tools, no crimping, no soldering, unions or glue.

Residential and commercial: all sharkbite fittings meet the same standards for commercial and residential plumbing applications. Sharkbite is the only push-to-connect brand than can ensure a clean, leak-free connection. Versatilty: sharkbite connects copper, PEX, CPVC, and PE-RT Pipe in any combination. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections. Use in potable water and hydronic heating applications.
BrandSharkBite #ad
ManufacturerCash Acme #ad
Height8 Inches
Length9 Inches
Width3.75 Inches
Part Number25033
Model25033

4. EFIELD

#ad

EFIELD Pex Pre-assembled Ice Maker Outlet Box,1/2-Inch PEX F1807 Crimp with Installed 1/4-Turn Ball Valve With Copper Water Hammer Arrester

#ad
EFIELD #ad - Equipped with a 1/2 inch crimp PEX inlet and 1/4 inch OD compression outlet connections. The rough opening is 5 inch x 3-1/2 inch x 2-3/4 inch. The snap-on faceplate dimensions are 6-1/2 inch x 5 inch. The box with one-piece box-and-flange design, no additional support framing required Working temperature is 34° F to 180° F, Working pressure is 125 PSI. Pre-installed 1/4 turn lead-free brass valve with copper hammer arrester; complies with NSF 61-G requirementsPortable Water Standard.
BrandEFIELD #ad
ManufacturerEFIELD #ad
Part NumberMH

5. EFIELD

#ad

EFIELD Sweat Pre-assembled Ice Maker Outlet Box,1/2-Inch Sweat with Installed 1/4-Turn Ball Valve, White

#ad
EFIELD #ad - The snap-on faceplate dimensions are 6-1/2 inch x 5 inch;. The rough opening is 5 inch x 3-1/2 inch x 2-3/4 inch;. The box with one-piece box-and-flange design, no additional support framing required. Equipped with 1/2 inch sweat inlet X 1/4 inch OD compression outlet connections. Pre-installed 1/4 turn lead-free brass valve; complies with NSF 61-G requirementsPortable Water Standard ;.
BrandEFIELD #ad
ManufacturerEFIELD #ad
Part NumberMH

6. EFIELD

#ad

EFIELD Push-fit Pre-assembled Ice Maker Outlet Box,1/2-Inch Push-Fit Connection with Installed 1/4-Turn Ball Valve With Copper Water Hammer Arrester

#ad
EFIELD #ad - Pre-installed 1/4 turn lead-free brass valve with copper hammer arrester; complies with NSF 61-G requirementsPortable Water Standard. The box with one-piece box-and-flange design, no additional support framing required. Equipped with 1/2 inch push fit connection inlet and 1/4 inch OD compression outlet connections with a disconnection clip tool. The snap-on faceplate dimensions are 6-1/2 inch x 5 inch;. The rough opening is 5 inch x 3-1/2 inch x 2-3/4 inch;.
BrandEFIELD #ad
ManufacturerEFIELD #ad
Part NumberMH

7. Eastman

#ad

1/2inch Push-Fit, White, Eastman 60266 Ice Maker Outlet Box

#ad
Eastman #ad - Connection: 1/2 inch push-Fit Connection and 1/4-inch OD compression outlet. Design: this outlet box is designed for recessed residential applications. Dimensions: rough opening of 5-3/4-inch w x 4-7/8-inch h x 3-1/2-inch D; Faceplate Dimensions: 8-1/4-in w x 7-5/16-in H. Contents: along with the ice maker box this pack includes a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover. Easy installation: One-piece design makes installation quicker and easier.
BrandEastman #ad
ManufacturerEastman #ad
Height3.6 Inches
Length9.6 Inches
Width10.2 Inches
Part Number60266
Model60266

8. Oatey

#ad

Without Faceplate or Brackets Fire Rated Icemaker Outlet Box, White, Plain, Oatey 38495, Valves

#ad
Oatey #ad - Adjustable metal mounting brackets. Warnock hersey certified, for 1-hour and 2-hour fire-rated walls. Box made of bulk molding Compound BMC with UL-classified insulating material. Box dimensions: 5-9/10"w x 5-4/5"H x 3-3/4"D. Warnock hersey certified, for 1-hour and 2-hour fire-rated walls. Faceplate dimensions: 8-1/8"W x 8-1/16"H.
BrandOatey #ad
ManufacturerOatey #ad
Height8.9 Inches
Length6.9 Inches
Width4.8 Inches
Part Number38495
Model38495
Warranty1-year limited

Tags: , , ,