As an Amazon Associate I earn from qualifying purchases.
1. ARCFONY #ad
110/220V Inverter Cutter, Pilot Arc CUT53N Pro 53Amps Non-HF Blow Back CNC Plasma Cutting Machine, Plasma Cutter #adARCFONY #ad
- Fan only working when temperature reach the rate. The cnc voltage ratio is 1:1, very easy work with CNC cutting table. What’s come with machine: 1×plasma cutter machine, 2×electrode, 1×air hose, 1×air regulator, 2×Tip Nozzle, 1×Earth clamp with cable, 1pc 2 Pins, 1×ipt53 cutting torch, 2× CNC port connector 1pc 5 pins, 1 × Wire Adapter.
Blow back pilot arc: 53amp plasma cutter with blow back non-hf pilot arc function, painted and rusted surfaces. Digital screen display, built-in overload protection and fan cooling system, the plasma cutting machine will not work, When the output current and machine temperature exceed the standard, Machine with error code system easy find the problem.
By cnc cutting, 10mm@110v 45psi; clean cutting thickness is 14mm@220V 65PSI, metal thickness less than 6mm under 110V.
Cutting speed 120mm/min. Pilot arc very efficient to cut rough, Please confirm your CNC table can match it before purchase this machine. Cutting thickness: severance cutting thickness 18mm@220v 65psi, we suggest the metal thickness less than 12mm under 220v, 8mm@110V 45PSI. Dual voltage 110/220v, 60% duty cycle igbt inverter, it’s 50/60hz non high Frequency Pilot Arc Plasma Cutter, Machine come with handle plasma cutting torch, dual voltage 110/220v, CNC torch is an optional.
2. LOTOS #ad
Lotos Supreme LTP5500DCNC Non-Touch Pilot Arc CNC Enabled Digital Plasma Cutter THC Torch Height Control Enabled, Dual Voltage 110V/220V, Brown, 3/5 inch Clean Cut #adLOTOS #ad
- Cnc enabled pre-installed cnc interface with thc torch height Controller signal output. Portable and powerful--the ltp5500d can easily cut 3/5” 15 mm metal with ultimate portability weighing only 15lbs; The LT5500D is an excellent choice for home DIY jobs and light duty small business projects.
Setup within 1 min--the per-installed npt 1/4” industry type d plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The non-hf start 14ft torch with central connector save your time to connect the torch to your plasma cutter.
Non-hf blowback start, there is no HF interference on your CNC computer. Buy with confidence: we offer 30 days refund and a 3-years limited warranty: include 1 year new replacement warranty.
20-35a dc output, Copper, etc. Suitable cutting--for stainless steel, alloy steel, 3/5” ideal clean cut and 1” maximum severance cut under 220/240V. Output: 20-55 a dc output, aluminum, 3/8" ideal clean cut and 1/2" maximum severance cut under 110/120V. The whole machine can be setup quickly within 1 min. Input: automatic dual voltage 110~125v or 215~245v. Non-hf--non-hf blowback Start, there is no HF interference. Please submit the registration form on our website.
3. hynade #ad
Hynade CNC Plasma Cutter Blow Back, Non-HF Pilot Arc Non-Touch 110/220V Plasma Cutting Machine, THC Torch Height Control Enabled CUT60DN #adhynade #ad
- All the cutting thickness under the rate 220v 55amps 60-75PSI, 4mm copper, 16mm stainless steel, 16mm Alloy steel, The cutting result may different depend on different voltage current and air pressure. Machine with function for torch protection, the led light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables, also with Air/Cut Function, machine is not able to work while it lighting up.
Dual voltage plasma cutter :this is a 110/220v non-hf blow back pilot arc plasma cutter, input power ac110/220v±15%, under 220v pilot arc will not reliable if the voltage lower than 190V.
Plasma cutter cutting thickness: max cutting thickness 25mm@55a 220v 70psi, clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 2 pins connector for the arc voltage output ratio 1:1, 4 pins connector for Signal Control.
Easy works with CNC cutting table. The plasma cutter with non-hf pilot arc function Not HF Pilot Arc Under this function, Pilot arc will not interference to machine HF Pilot Arc will interference to machine. Cnc plasma cutting machine : have 2 pins and 4 pins connecting port at rear of machine. 2t/4t function :plasma cutting machine cut60dn with 2t/4t function, 2t 4t easy let the user operate machine and it is great help for the CNC cutting table. 63a power break, 45L/min Air compressor is suggested. Thc torch height control enabled.
4. GZ GUOZHI #ad
GZ GUOZHI CNC Plasma Cutter, THC Torch Height Control Enabled, 65 Amp Non-HF Non-Touch Pilot Arc, Dual Voltage 110V/220V Digital Plasma Cutter Machine, 1" Clean Cut #adGZ GUOZHI #ad
- Safety guarantee: guozhi 65 nhf cutting machine with automatic drainage function, protect the electrode and nozzle. 2t/4t/test function, with excellent and reliable quality, easy to operation. The whole machine can be setup quickly within 1 min. Package included: s65 13-feet plasma torch gun assembly, high quality auto darkening welding glasses, 10-feet 500A Work Clamp Assembly, durable and not easy to damage.
Advanced technology : this cutter can cut normally at minus 20 degree. Set up within 1 minute: mnpt 1/4 inch industrial d-type coupler, can easily and quickly connect to the air compressor, making it more convenient and easier for the users to use, the users do not need to install the air pressure regulator.
Maximum cutting thickness is 8/5", smooth cutting section and no polish demands. Non-hf pilot arc non-touch plasma cutter: guozhi 65nhf plasma cutter has non-hF pilot arc Non-touch Plasma cutting, no interference to human body, the cutting effect is very strong and the effect is 1.
5 times higher than the ordinary Cutting machine. This cutter with over-heating and over-current protection functions, use more safety. This plasma cutter able to cut stainless steel, mild steel, the ideal clean Cutting Thickness is 1", High cutting speed, alloy steel, copper，aluminum and other metal materials. Dual-voltage & high-quality accessories: 20a-65a current adjustment, unafraid of the voltage fluctuations, 90v-260v wide-voltage design, etc.
5. SUSEMSE #ad
SUSEMSE P80 Plasma Cutting Torch Inverter Plasma Cutter Gun Pilot Arc Non Touch Start 2 Pins Fit CNC CUT 50P CUT 60P Plasma Cutting Machine 3M 10 Feet #adSUSEMSE #ad
- What you get: p80 plasma cutting torch 1 set. P80 torch is suitable for most plasma cutting machines such as CNC Machines and cut50p, cut60p, cut55p, plc55p, plc65p etc Pilot Arc plasma cutter. Featuring an ergonomic handle design allows a long time holding the cutting gun but not fatigue.
The max cutting thickness of this P80 torch is 1 inch 25mm, the rated welding current 10A-80A. P80 torch is characterized by high cutting speed, high precision, good cutting effect and small thermal deformation. Torch length: 3M 10 Feet.
6. hynade #ad
Blow Back Straight Torch Cutting Head, For Blow Back Non-HF Pilot Arc Plasma Cutter CUT80NP, Not able to work with High Frequency Cutter, hynade PTM80 CNC Plasma Cutting Torch, CUT60DN #adhynade #ad
- The blow back plasma cutter torch head work with CNC, 1+4 link for pilot ARC; 3+5 for torch switch; 8+9 for shield cup in placeTorch protect. 80amps ptm80 ideal for cut80np, cut60dn plasma cutter, use PTM80IPTM80 consumables.
The torch not original, just replacement parts. Ptm80 plasma torch standard cable length: 20ft. Ptm80 plasma cutting torch with 4 Pin Male Adaptor cable, make sure that your plasma cutter is Female Central Adaptor. Ptm80 iptm80 non-hf pilot Arc straight torch cutting head.
7. Everlast Welders Canada #ad
2021 PowerPlasma 62i plasma cutter Inverter Type Cutting System 60amp with CNC Package #adEverlast Welders Canada #ad
- Pilot arc improves performance and cutting on dirty, painted, or rusted metals. Easy starting with Blow Back Pilot arc allows easy cutting of rusty and painted metals. Blowback start starts arc without the need of High Frequency which can interfere with surrounding electronics.
3 second pilot arc tip saver feature shuts down pilot arc after 3 seconds of contiuous operation if no cutting is present to prevent premature consumable wear.
Over current and duty cycle protection indicates fault with a dedicated warning/diagnostic light, and shuts down output until condition is resolved.
Blowback start starts arc without the need of High Frequency which can interfere with surrounding electronics. Adjustable postflow timer for maximum consumable life. Comes with cnC torch Hand torch not included. Igbt modules from infineon Siemens improve reliability and performance while reducing overall weight. Suitable for use with 11, 000 W "clean power" generators.
8. STVMotorsports #ad
STV Motorsports CNC Plasma Table, Made in the USA SparX510-5x10 #adSTVMotorsports #ad
- Consistency and speed: the stv cnc sparx series plasma tables are using high accuracy stepper motors for speed, control and smooth operation; it will offer you excellent consistency and speed.
Lifetime support package: 1 year warranty and Lifetime Customer Support, Tutorials and Videos, Setup and Installation Support, How-to’s Manuals. High end technology: the stv CNC Plasma Cutting Tables offer the best technology and high-quality components.
Used for many applications: our cnc plasma cutting machines works for a wide range of applications, using a Windows – based software software package and license included0 Very durable and made in the usa: our tables are built tough and designed to easily handle 3/4” steel plates but they can handle more.
9. Tosense #ad
Dual Voltage Pilot Arc, Non-touch Plasma Cutter Torch CNC 220V 80A, P80 Plasma Cutter Torch Plasma Cutting Equipment, 1 Inch Clean Cut Fit CUT50P CUT60P LTP7000 LTP8000 LGK60 LGK100 5M #adTosense #ad
- Hf ignition: the p80 torch is easy to start arc. Scope of application: suitable for 80amp plasma cutter machines such as the cUT50P PLC55P CUT60P LTP7000 LTP8000 LGK60 LGK80 LGK100 models.
Rated cutting current: 30A-80A. It provides a better cutting quality and longer consumable life. Max cutting thickness: 1 inch 25mm. Compatibility: the p80 plasma cutter gun is compatible with standard of P80 torch for 10-80A plasma cutting machine.
Pilot arc plasma cutter torch: the p80 can efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag; the technology allows you to cut without touching the tip to the metal. P80 plasma cutting torch length: 16. 4 feet5m. Pilot arc starts plasma cutter torch.
10. Everlast Welders Canada #ad
2021 PowerPlasma 62i 60 Amp CNC compatible plasma cutter #adEverlast Welders Canada #ad
- Pilot arc improves performance and cutting on dirty, painted, or rusted metals. 60amp inverter type cutter @ 60% duty cycle -- 5 Year Warranty Parts and Labor.
Maximum up to 1 1/4" severance cut. Igbt infineon Modules / Inverter technology. 3 second pilot arc tip saver feature shuts down pilot arc after 3 seconds of continuous operation if no cutting is present to prevent premature consumable wear.
Adjustable postflow timer with digital display for maximum consumable life and ease of use. Ideal for regularly Cutting 3/4". Comes with blow Back IPT-60 plasma torch. Blowback start starts are fast and reliable. Suitable for use with 11, 000 W "clean power" generators.